Comments on: L2 MPLS VPNs on H3C MSR devices http://www.kuncar.net/blog/l2-mpls-vpns-on-h3c-msr-devices/2010/ Sat, 03 Dec 2011 23:57:52 +0000 hourly 1 http://wordpress.org/?v=3.3.1 By: kuki http://www.kuncar.net/blog/l2-mpls-vpns-on-h3c-msr-devices/2010/comment-page-1/#comment-643 kuki Thu, 17 Feb 2011 11:22:49 +0000 http://www.kuncar.net/blog/?p=462#comment-643 Here is my email - <e -mail removed as a protection against SPAM> - I am in a bad need to set these things up. Hope you can and you would like to help me a little bit ;)</e> Here is my email – – I am in a bad need to set these things up. Hope you can and you would like to help me a little bit ;)

]]> By: kuki http://www.kuncar.net/blog/l2-mpls-vpns-on-h3c-msr-devices/2010/comment-page-1/#comment-642 kuki Thu, 17 Feb 2011 11:15:03 +0000 http://www.kuncar.net/blog/?p=462#comment-642 hi, so far so good.. I did not notice there are more specialized documentation files on the h3c webpage... I used MSR 20 30 50 generic document while there is 20-1X specific available. thanks. Anyway I was able to setup interfaces, basic routing, wlan. The problem is I do not know hot to setup congestion avoidance and QoS based on application layer protocol determination. I tried to configure WFQ and WRED on ethernet 0/0 (wan interface) to queue and drop packets by precedence but it does not seem to work. The problem I have is a 2Mbps connection + 10Mbps connetion to WWW cache proxy. There are 10-12 users for that connection. It will be extended but for now we have a problem with congestion caused by p2p traffic which I would like to solve without killing it. can you help? because I have no idea how to set dynamic connection BW (2/10Mbps) Regards, Peter hi,
so far so good.. I did not notice there are more specialized documentation files on the h3c webpage… I used MSR 20 30 50 generic document while there is 20-1X specific available. thanks.

Anyway I was able to setup interfaces, basic routing, wlan. The problem is I do not know hot to setup congestion avoidance and QoS based on application layer protocol determination.

I tried to configure WFQ and WRED on ethernet 0/0 (wan interface) to queue and drop packets by precedence but it does not seem to work.

The problem I have is a 2Mbps connection + 10Mbps connetion to WWW cache proxy. There are 10-12 users for that connection. It will be extended but for now we have a problem with congestion caused by p2p traffic which I would like to solve without killing it. can you help? because I have no idea how to set dynamic connection BW (2/10Mbps)

Regards,
Peter

]]> By: tnk http://www.kuncar.net/blog/l2-mpls-vpns-on-h3c-msr-devices/2010/comment-page-1/#comment-641 tnk Wed, 16 Feb 2011 16:54:01 +0000 http://www.kuncar.net/blog/?p=462#comment-641 Hi, well the documentation and software is released freely by the vendor on the following link <a href="http://www.h3c.com/portal/Technical_Support___Documents/Technical_Documents/Routers/H3C_MSR_20-1X_Series_Routers/" rel="nofollow">http://www.h3c.com/portal/Technical_Support___Documents/Technical_Documents/Routers/H3C_MSR_20-1X_Series_Routers/</a> So I would suggest to start there. The most important documents are (in my opinion) Operation and Command manuals. If you have more specific questions. Post a comment or send me an e-mail and we can discuss the issue. Hi, well the documentation and software is released freely by the vendor on the following link http://www.h3c.com/portal/Technical_Support___Documents/Technical_Documents/Routers/H3C_MSR_20-1X_Series_Routers/ So I would suggest to start there. The most important documents are (in my opinion) Operation and Command manuals. If you have more specific questions. Post a comment or send me an e-mail and we can discuss the issue.

]]> By: kuki http://www.kuncar.net/blog/l2-mpls-vpns-on-h3c-msr-devices/2010/comment-page-1/#comment-640 kuki Wed, 16 Feb 2011 16:30:48 +0000 http://www.kuncar.net/blog/?p=462#comment-640 Hi again, I do have now MSR 20-15 at my place. I have never used that advanced router before and I am looking for some aid - materials, documentation - that will help me to configure that device. I wonder if you would be willing to email me that I could ask you some questions. Regards, Peter Hi again,
I do have now MSR 20-15 at my place. I have never used that advanced router before and I am looking for some aid – materials, documentation – that will help me to configure that device.
I wonder if you would be willing to email me that I could ask you some questions.
Regards,
Peter

]]> By: tnk http://www.kuncar.net/blog/l2-mpls-vpns-on-h3c-msr-devices/2010/comment-page-1/#comment-639 tnk Wed, 16 Feb 2011 15:14:02 +0000 http://www.kuncar.net/blog/?p=462#comment-639 Hi, first of all - thank you for the comment and yes it would be nice to have somebody to collaborate but unfortunately I haven't met anyone willing to devote some time to contribute. I myself am in quite difficult position as I do not have that much kit at my disposal and I am fairly limited by the amount of time I can assign to this blog. The article I would really like to write is about QinQ as it is the kind of "hot topic" everyone needs but the only thing you can find is some cisco/juniper configs. Well we'll see but I still hope this blog will not die due to lack of my time. Hi,
first of all – thank you for the comment and yes it would be nice to have somebody to collaborate but unfortunately I haven’t met anyone willing to devote some time to contribute. I myself am in quite difficult position as I do not have that much kit at my disposal and I am fairly limited by the amount of time I can assign to this blog. The article I would really like to write is about QinQ as it is the kind of “hot topic” everyone needs but the only thing you can find is some cisco/juniper configs.
Well we’ll see but I still hope this blog will not die due to lack of my time.

]]> By: kuki http://www.kuncar.net/blog/l2-mpls-vpns-on-h3c-msr-devices/2010/comment-page-1/#comment-638 kuki Wed, 16 Feb 2011 14:57:03 +0000 http://www.kuncar.net/blog/?p=462#comment-638 Hi, I really liked your articles on H3C stuff. If you can invite more writers, or do more articles by yourself, that would be perfect as stuff concerning H3C devices in language other than chinese are hard to get. Thanks again, Peter Hi, I really liked your articles on H3C stuff. If you can invite more writers, or do more articles by yourself, that would be perfect as stuff concerning H3C devices in language other than chinese are hard to get.
Thanks again,
Peter

]]> By: tnk http://www.kuncar.net/blog/l2-mpls-vpns-on-h3c-msr-devices/2010/comment-page-1/#comment-632 tnk Wed, 12 Jan 2011 15:14:47 +0000 http://www.kuncar.net/blog/?p=462#comment-632 Hi Nicolas, thanks for your message. I can have a look at your configuration if you send it to me, but currently I do not have any MSRs to play with. But there is always a chance that I will spot something you've overlooked. Anyway if you send me your configs and expected topology on the e-mail published on the "about" page I will try at least. TNK Hi Nicolas,
thanks for your message. I can have a look at your configuration if you send it to me, but currently I do not have any MSRs to play with. But there is always a chance that I will spot something you’ve overlooked. Anyway if you send me your configs and expected topology on the e-mail published on the “about” page I will try at least.
TNK

]]> By: Nicolas http://www.kuncar.net/blog/l2-mpls-vpns-on-h3c-msr-devices/2010/comment-page-1/#comment-631 Nicolas Wed, 12 Jan 2011 12:50:27 +0000 http://www.kuncar.net/blog/?p=462#comment-631 Hi , i'm french and i read your article, i like it good post of H3C topics. I did a L3VPN configuration with iBGP MPLS VPN between 2 PE but i have little problemes with the virtual interface (FE 7/1.1) or (ip address x.x.x.x netmask sub) . So my question is how can you put 3 consumers on the same PEs virutals interfaces? Hi , i’m french and i read your article, i like it good post of H3C topics.
I did a L3VPN configuration with iBGP MPLS VPN between 2 PE but i have little problemes with the virtual interface (FE 7/1.1) or (ip address x.x.x.x netmask sub) .
So my question is how can you put 3 consumers on the same PEs virutals interfaces?

]]> By: tnk http://www.kuncar.net/blog/l2-mpls-vpns-on-h3c-msr-devices/2010/comment-page-1/#comment-527 tnk Thu, 27 May 2010 15:53:19 +0000 http://www.kuncar.net/blog/?p=462#comment-527 Hi, I am not exactly sure if this is spam or not (as akismet has evaluated it as spam). But in case it is not a spam - It depends - Originally I was thinking about more writers for this blog but then I decided against it for multiple reasons. On the other hand it is almost two years now since that decision. So you can send me your Ideas on the contact address I provide in the <a href="http://www.kuncar.net/blog/about/" rel="nofollow">about page</a> and I'll see. Hi, I am not exactly sure if this is spam or not (as akismet has evaluated it as spam). But in case it is not a spam – It depends – Originally I was thinking about more writers for this blog but then I decided against it for multiple reasons. On the other hand it is almost two years now since that decision. So you can send me your Ideas on the contact address I provide in the about page and I’ll see.

]]> By: bukmacher http://www.kuncar.net/blog/l2-mpls-vpns-on-h3c-msr-devices/2010/comment-page-1/#comment-526 bukmacher Thu, 27 May 2010 14:31:30 +0000 http://www.kuncar.net/blog/?p=462#comment-526 HI dude, can i post articles to your blog ? Let me know if you are interested HI dude, can i post articles to your blog ? Let me know if you are interested

]]>